Welcome to PLOSON Brand website!
+86 137 6027 1017
ploson@163.com , Sales Contact : Eugene (WeChat:CN20290101)
Product Center
——
Digital to Stepper Gyro Converter ( D/A-15 ) can convert digital signals into stepper signals. The input gyro compass signal is in NMEA0183 format, Baud rate: 4800 or 9600; Multiple statements can be identified: $–HDT、$–HDM、$–HDG, the output gyro compass signal is 24V stepper signal ( COM+、S1、S2、S3 ). Ratio (180: 1 or 90 : 1), tracking rate (8).
Digital to Stepper Gyro Converter Instruction
Digital to Stepper Gyro Converter ( D/A-15 ) can convert digital signals into stepper signals. The input gyro compass signal is in NMEA0183 format, Baud rate: 4800 or 9600; Multiple statements can be identified: $–HDT、$–HDM、$–HDG, the output gyro compass signal is 24V stepper signal ( COM+、S1、S2、S3 ). Ratio (180: 1 or 90 : 1), tracking rate (8).
1.Digital to Stepper Gyro Converter
2 .Baud rate and ratio can adjustable .
Gyro converter default set baud rate of 4800, the ratio of 180: 1; If you want to adjust the baud rate or ratio, you need to open the machine panel and adjust the dial switch on the PCB board.
3.Tracking rate
By adjusting the speed of the gyro converter panel, the knob can adjust the compass tracking rate, which is divided into 8 stages. The larger the number of knobs, the faster the tracking speed.
Main index:
a、Dimension: 295mm X 245mm X 120mm;
b、Power supply: 220VAC or 110VAC (optional 24VDC);
c、Excitation voltage: 110VAC; Phase voltage (0-50VAC);
d、Tracking rate 1-8: adapt to different repeater(gyro repeater),the device can adjust the tracking speed;
e、working temperature: -20 ~ +70 ℃;
f、humidity: relative humidity: < 95%;
g、loading: Direct drive bearing repeater 1-2, drive gyro converter 1-4.

Copy product links
Long by picture save/share

To Get PLOSON Marine Hardware Information, Discount Message And How-To Knowledge Articles From PLOSON Marine.
